Follow these instructions for removal of the XSG lens carrier.
-
You'll see a narrow gap from the top view looking down toward the top edge of the eyewear. You will want to wedge a finger in between the lens frame (either lens, left or right) and the main frame.
-
You'll pull out the lens frame insert tab from the main frame, which is toward the outer side of the lens you're holding. It'll take a little force to pull it out -- you won't break it.
-
You'll then pull the lens unit from out of the nose bridge slot on the main frame.
-
The other lens will slide out easily.
Lenses are inserted in reverse order from those directions.